After you open your shipment, you must verify the contents
against the packing slip.
In each box, locate the packing slip. Verify that the
items listed in the packing slip match what is in the box, and that
any optional items that you ordered are included in the list. Your
shipment might contain extra items, depending on the order.
Note: If you purchased your equipment through a reseller, some of the options
might be preinstalled. Contact your supplier for details.
Use the following checklist to check off the items in
your order as you verify that they are included in your shipment.
- Rack-mounting hardware kit:
- Two rails (right and left assembly)
- Two rail springs
- Two sets of rail-mount screws and alternative rail-mount pins
(large and small) for various racks
- Two power cords for connection to rack-mounted power distribution
units
- Drive bay blanking plates (installed in the enclosure)
- Publications package
Options applicable to control enclosures
Note: All options other than cables are
preinstalled.
- Cache memory upgrade
- Four-port 8 Gbps Fibre Channel host interface adapter with two small form-factor pluggable (SFP) transceivers installed
- Fibre Channel cables
- SAS cables
- Four-port 10 Gbps iSCSI / FCoE host interface adapter
- Compression accelerator
- Drives
- Power cords for connection to wall sockets
Options applicable to
expansion enclosures
Note: All options other than cables are preinstalled.
- Expansion enclosure attachment cables
- Drives
- Power cords for connection to wall sockets