If a control enclosure is not detected by the system, this
procedure can help you resolve the problem.
When installing a new control enclosure, use the Add
Enclosures wizard in the management GUI. To access this
wizard, select . On the Systems page, select .
If the control enclosure is not detected, check
the following items:
- The enclosure is powered on.
- The enclosure is not part of another system.
- At least one node is in candidate state.
- The Fibre Channel cables are connected and zoning is set up according
to the zoning rules defined in the SAN configuration and zoning
rules summary topic. There must be a zone that includes all
ports from all node canisters.
- The existing system and the nodes in the enclosure
that are not detected have version 6.2 or later installed.