The host bus adapters (HBAs) for a z Systems host must be ordered
as features. These features are either factory-installed when you
order a new system or installed into an existing system by a service representative.
To check the installation of the HBA and
to configure the HBA to work with the system, complete the following
steps:
- Ensure that FICON, FICONExpress, FICON Express2,
or FICON Express4 features
are installed on your z Systems host.
- Configure the HBA to run in FCP mode.
See the following Lenovo website
for additional information about FCP connectivity:
www.ibm.com/systems/z/hardware/connectivity/