You must configure the Solaris operating system before you can use Sun hosts with the
system.
Before you configure
the Solaris operating system, the following
tasks must be completed:
- The Lenovo service representative must install the Lenovo Storage V7000 system.
- You must install the appropriate host bus adapters.
After
the prerequisite tasks are complete, use the following
general steps to configure your Solaris operating system.
- Zone the host system to the system on the Fibre Channel SAN.
- Install the appropriate multipathing driver for your host system to enable the management of
multiple paths to system volumes.
Note: The subsystem device driver (SDD) does not support
the Solaris operating system in a clustered-system environment.
- Create the host system on the system by using the worldwide port names (WWPNs). Map the
volumes to the host.
- Create volumes and disks on your host by using instructions that are in your host system
publications.