Use the resetleds command
to simultaneously switch off all light-emitting diodes (LEDs) in the
clustered system (system), including node battery LEDs.
Parameters
None.
Description
The
resetleds command
simultaneously switches off all LEDs in the system, including node
battery LEDs. This ensures that any identity LED switched on is the
only one in the system that is switched on. This command works only
on LEDs that are on systems that can communicate, which means they
are online or of a supported type. This command fails if an object
is offline, or if the enclosure is an unsupported type. This command
does not affect LEDs:
- On independently-controlled objects
- On offline objects
- With hardware-only controls
An invocation example
resetleds
The
resulting output:
No feedback