Use the rescuenode command to start
automatic recovery for a specific node.
Syntax
sataskrescuenode -force [ panel_name ]
Parameters
- panel_name
- (Optional) Identifies the node being serviced.
Note: If panel_name is
not supplied, this applies to the node on which the command is running.
- -force
- (required) The -force parameter is
required because this service action can cause temporary or permanent loss of access to data. Use
this command only when the node reports corrupted system code (code).
Description
This command starts
automatic recovery for a specific node. Use this command only when
the node reports corrupted code.
An invocation example
satask rescuenode -force 112233
The
resulting output:
No feedback