Use the mkuser command to create either
a local or a remote user to access a Lenovo Storage V7000 clustered system (system).
Syntax
mkuser -nameuser_name { -remote | -usergrp { group_id | group_name } { -keyfilesshkey_filename | -password [cleartext_password] } }
Parameters
- -name user_name
- (Required) Specifies the unique user name. The user name cannot
start or end with a blank. The user name must consist of a string
of 1 - 256 ASCII characters, with the exception of the following characters:
%:",*' .
- -remote |-usergrp
- (Required) Specifies whether the user authenticates to the system
using a remote authentication service or system authentication methods.Either
the remote parameter or the usergrp parameter
must be set. If usergrp is specified, it must
be followed by group_name or group_id (see
next parameter).
- group_name| group_id
- (Required if usergrp is specified) The ID
or name of the user group with which the local user is to be associated.
- -password cleartext_password
- (Optional) Specifies the password to be associated with the user.
The password cannot start or end with a blank. It must consist of
a string of 6 - 64 printable ASCII characters. You can optionally
specify the password with the password parameter.
If you do not specify the password, the system prompts you for it
before running the command and does not display the password that
you type.
- -keyfile sshkey_filename
- (Optional) Specifies the name of the file that contains the Secure
Shell (SSH) public key.
Description
The mkuser command
creates a new local or remote user to access a system. The command
returns the ID of the created user.
You must have the Security
Administrator role to create, delete, or change a user.
If you
create a local user, you must specify the existing user group that
the user belongs to. All local users must have a group. The user group
defines roles that provide the user with access to specific operations
on the system. You must also specify either the keyfile or password parameter,
or both.
If you create a remote user, you must specify both
the keyfile and password parameters.
Remote users have their groups defined by the remote authentication
service.
Up to 400 users can be defined on the system. You can
also create new users and assign keys to them.
If
you use the keyfile parameter, the SSH key file
should be placed in the /tmp directory before
running this command. When you run the command, the SSH key is copied
into system state and activated for the user, and the input file is
deleted.
An invocation example
mkuser -name jane -usergrp Service -password secret
The
resulting output:
User, id [1], successfully created