migratetoimage

Use the migratetoimage command to migrate data from a volume (image mode or managed mode) onto a new image mode volume copy. The target disk does not have to be in the same storage pool as the source disk.

Syntax

migratetoimage [ -copyid ] -vdisk { source_vdisk_id | source_vdisk_name } [ -threadsnumber_of_threads ] -mdisk { unmanaged_target_mdisk_id | unmanaged_target_mdisk_name } [ -tier { ssd | enterprise | nearline } ] -mdiskgrp { managed_disk_group_id | managed_disk_group_name }

Parameters

-vdisksource_vdisk_id | name
(Required) Specifies the name or ID of the source volume to be migrated.
-copyid
(Required if the specified volume has more than one copy) Specifies the volume copy to migrate from.
-threadsnumber_of_threads
(Optional) Specifies the number of threads to use during the migration of extents. You can specify 1 - 4 threads. The default number of threads is 4.
-mdiskunmanaged_target_mdisk_id | name
(Required) Specifies the name of the MDisk to which the data must be migrated. This disk must be unmanaged and large enough to contain the data of the disk that is being migrated.
-mdiskgrpmanaged_disk_group_id | name
(Required) Specifies the storage pool into which the MDisk must be placed, after the migration has completed.
-tierssd | enterprise | nearline
(Optional) Specifies the tier of the MDisk being added.
ssd
Specifies an SSD (or flash drive) hard disk drive or an external MDisk for the newly discovered or external volume.
nearline
Specifies an nearline hard disk drive or an external MDisk for the newly discovered or external volume.
enterprise
Specifies an enterprise hard disk drive or an external MDisk for the newly discovered or external volume.

Description

The migratetoimage command migrates the data of a user-specified volume by consolidating its extents (which might reside on one or more MDisks) onto the extents of the target MDisk that you specify. After migration is complete, the volume is classified as an image type volume, and the corresponding mdisk is classified as an image mode MDisk.
Remember: This command cannot be used to if the source volume copy is in a child pool or if the MDisk group that is specified is a child pool.

This command does not work if the volume is fast formatting.

The managed disk that is specified as the target must be in an unmanaged state at the time that the command is run. Running this command results in the inclusion of the MDisk into the user-specified storage pool.

The migratetoimage command fails if the target or source volume is offline. Correct the offline condition before attempting to migrate the volume.

Remember: This command cannot be used on a volume owned by a filesystem or if the source MDisk is an SAS MDisk (which works in image mode only)..

If the volume (or volume copy) is a target of a FlashCopy mapping with a source volume in an active-active relationship the new managed disk group must be in the same site as the source volume. If the volume is in an active-active relationship the new managed disk group must be located in the same site as the source volume. Additionally, the site information for the MDisk being added must be well-defined and match the site information for other MDisks in the storage pool.

Note: You cannot migrate date from a volume if the target volume's formatting attribute value is yes.

An encryption key cannot be used when migrating an image mode MDisk. To use encryption (when the MDisk has an encryption key), the MDisk must be self-encrypting.

An invocation example

The following example specifies that the user wants to migrate the data from vdisk0 onto mdisk5 and that the MDisk must be put into the storage pool mdgrp2.
migratetoimage -vdisk vdisk0 -mdisk mdisk5 -mdiskgrp mdgrp2 -tier nearline 

The resulting output:

No feedback