Use the lsroute command to display the IP routing table.
There are no parameters for this command.
This command displays the IP routing table. The table provides details of the gateway that is used for IP traffic to a range of IP addresses for each Ethernet port. This information can be used to diagnose configuration node accessibility problems. The lsroute command is equivalent to the Linuxroute command.
lsroute
The resulting output:
Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 9.71.46.0 0.0.0.0 255.255.254.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 9.71.46.1 0.0.0.0 UG 0 0 0 eth0
Kernel IPv6 routing table Destination Next Hop Flags Metric Ref Use Iface 2002:914:fc12:849::/64 :: UA 256 3675 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 fe80::7:b4ff:fe00:500 UGDA 1024 1 0 eth0 ::1/128 :: U 0 1441 1 lo 2002:914:fc12:849:214:5eff:fe33:5192/128 :: U 0 0 1 lo fe80::214:5eff:fe33:5192/128 :: U 0 0 1 lo ff00::/8 :: U 256 0 0 eth0