lsfcmap

Use the lsfcmap command generate a list containing concise information about all of theFlashCopy® mappings that are visible to the clustered system (system), or detailed information for a single FlashCopy mapping.

Syntax

lsfcmap [ -filtervalueattribute=value ] [ -nohdr ] [ -delimdelimiter ] [ -filtervalue? ] [ { object_id | object_name } ]

Parameters

-filtervalueattribute=value
(Optional) Specifies a list of one or more filters. Only objects with a value that matches the filter attribute value are displayed.
Note: Some filters allow the use of a wildcard when you enter the command. The following rules apply to the use of wildcards with the Lenovo Storage V7000 CLI:
  • The wildcard character is the asterisk (*).
  • The command can contain a maximum of one wildcard.
  • When you use a wildcard, enclose the filter entry within double quotation marks (""), as follows: 
    lsfcmap -filtervalue "name=md*"
-filtervalue?
(Optional) Displays the valid filter attributes for the -filtervalueattribute=value parameter:
  • name
  • id
  • source_vdisk_id
  • source_vdisk_name
  • target_vdisk_id
  • target_vdisk_name
  • group_name
  • group_id
  • status
  • copy_rate
  • FC_mapping_name
  • FC_id
  • partner_FC_id
  • partner_FC_name
  • restoring

For more information about filtering attributes, see Attributes of the -filtervalue parameters.

-nohdr
(Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. The nohdr parameter suppresses the display of these headings.
Note: If there is no data to be displayed, headings are not displayed.
-delim delimiter
(Optional) By default in a concise view, all columns of data are space-separated. The width of each column is set to the maximum possible width of each item of data. In a detailed view, each item of data has its own row, and if the headers are displayed the data is separated from the header by a space. The delim parameter overrides this behavior. Valid input for the delim parameter is a one-byte character. If you enter -delim : on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter.
object_id | object_name
(Optional) Specifies the name or ID of an object. When you use this parameter, the detailed view of the specific object is returned and any value that is specified by the filtervalue parameter is ignored. If you do not specify the object_ID or object_name parameter, the concise view of all objects matching the filtering requirements that is specified by the filtervalue parameter are displayed.

Description

This command returns a concise list or a detailed view of FlashCopy mappings that are visible to the system.

The following list shows attribute values that can be displayed as output view data:
id
Displays the mapping ID.
name
Displays the mapping name.
source_vdisk_id
Displays the source volume ID.
source_vdisk_name
Displays the source volume name.
target_vdisk_id
Displays the target volume ID.
target_vdisk_name
Displays the target volume name.
group_id
Displays the group ID.
group_name
Displays the group name.
status
Displays the status:
  • idle_or_copied
  • preparing
  • prepared
  • copying
  • stopped
  • suspended
  • stopping
progress
Displays the progress.
copy_rate
Displays the copy rate.
start_time
Displays the time that the copy was last started. It is in the format YYMMDDHHMMSS. If a copy has not been started, a blank line is displayed.
dependent_mappings
Displays any dependent mappings.
autodelete
Specifies if autodelete is on or off.
clean_progress
Indicates the clean progress.
clean_rate
Indicates the clean rate.
incremental
Indicates whether incremental is on or off.
difference
Indicates the difference.
IO_group
Displays the I/O group ID.
IO_group_name
Displays the I/O group name.
partner_FC_id
Displays the partner FlashCopy ID/
partner_FC_name
Displays the partner FlashCopy name.
restoring
Displays the restoring status. The values are yes or no.
rc_controlled
Displays the rc_controlled status.
copy_rate_mb
Displays the copy rate MB amount.
clean_rate_mb
Displays the clean rate MB amount.
keep_target
Displays the target and source volume availability. The values are:
  • yes, which indicates that the source volume availability is connected to the availability of the target volume
  • no, which indicates that if there is a problem with the target volume that can impact FlashCopy operations, the target volume is removed
estimated_copying_completion_time
Displays the estimated time that the background copy takes to complete. It is in the format YYMMDDHHMMSS. If a copy has not been started or the copyrate is 0, a blank line is displayed
estimated_stopping_completion_time
Displays the estimated time that the stopping takes to complete. It is in the format YYMMDDHHMMSS. If a copy is not stopping a blank line is displayed.
restore_progress
Displays the percentage of the source volume that has been restored from the target.
estimated_restore_completion_time
Displays the estimated time that the restore takes to complete. It is in the format YYMMDDHHMMSS. If a copy is not restoring then a blank line is displayed.
Note: Using rc_controlled indicates that the map is for internal use only. It cannot be manipulated externally.

A concise invocation example

lsfcmap -delim :

The concise resulting output: 

id name source_vdisk_id:source_vdisk_name:target_vdisk_id:target_vdisk_name:group_id 
   group_name:status:progress:copy_rate:clean_progress:incremental:partner_FC_id:
   partner_FC_name:restoring:start_time:rc_controlled
0:test:0:vdisk0:1:vdisk1:idle_or_copied:0:50:100:off:no
no0:fcmap0:0:vdisk0:1:vdisk1:0:fccstgrp0:idle_or_copied:0:50:0:on:2:fcmap2:no
1:fcmap1:2:vdisk2:3:vdisk3:0:fccstgrp0:idle_or_copied:0:0:100:off:::no
2:fcmap2:1:vdisk1:0:vdisk0:0:fccstgrp1:idle_or_copied:0:0:100:off:0:fcmap0:no

A detailed invocation example

lsfcmap 0

The detailed resulting output: 

id:0
name:fcmap0
source_vdisk_id:63
source_vdisk_name:vdisk63
target_vdisk_id:57
target_vdisk_name:vdisk57
group_id:
group_name:
status:idle_or_copied
progress:0
copy_rate:0
start_time:
dependent_mappings:0
autodelete:off
clean_progress:100
clean_rate:50
incremental:off
difference:100
grain_size:256
IO_group_id:1
IO_group_name:io_grp1
partner_FC_id:
partner_FC_name:
restoring:no
rc_controlled:no
keep_target:yes
esimated_copying_completion_time:
esimated_stopping_completion_time:
restore_progress:
esimated_retore_completion_time:
Parent topic: FlashCopy commands