After you have ran the analyzevdisk or the analyzevdiskbysystem commands to analyze volumes for the potential compression savings, you can display the results for the completed volumes with the lsvdiskanalysis command.
lsvdiskanalysis -vdisk_name | -vdisk_id
where -vdisk_name or -vdisk_id is
either the name or identifier for the volume that you want to analyze
for compression savings. The following is an example of the output
for this command for a single volume:id 6 name vol6 state estimated started_time 150608135446 analysis_time 150608135456 capacity 1.00GB thin_size 62.18MB thin_savings 961.82MB thin_savings_ratio 93.92 compressed_size 12.23MB compression_savings 49.95MB compression_savings_ratio 80.33 total_savings 1011.77MB total_savings_ratio 98.80 accuracy 4.97
lsvdiskanalysis
The
following is an example of the output for this command for multiple
volumes:id name state analysis_time capacity thin_size thin_savings thin_savings_ratio compressed_size compression_savings compression_savings_ratio total_savings total_savings_ratio accuracy 0 vol0 idle 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 1 vol1 idle 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 2 vol2 active 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 3 vol3 idle 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 4 vol4 idle 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 5 vol5 idle 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 6 vol6 estimated 150608135456 1.00GB 62.18MB 961.82MB 93.92 12.23MB 49.95MB 80.33 1011.77MB 98.80 4.97 7 vol7 scheduled 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0 0 8 vol8 idle 1.00GB 0.00MB 0.00MB 0 0.00MB 0.00MB 0 0.00MB 0