Use the leavecluster command to remove
clustered system (system) state data, location information, and other
history from a node.
Syntax
sataskleavecluster -force [ panel_name ]
Parameters
- -force
- (Required) The -force parameter is required
because this service action can cause temporary or permanent loss
of access to data. Use this command only when a service procedure
instructs you to do so.
- panel_name
- (Optional) Identifies the node being serviced. The
default is the node on which the command is entered.
Note: If panel_name is
not supplied, this applies to the node on which the command is running.
Description
Use
this command to remove system state data,
location information, and other history from a node.
An invocation example
satask leavecluster -force 78G00F3-2 /* this forces the node with panel_name=78G00F3-2 out of the clustered system */
The
resulting output:
No feedback
An invocation example
satask leavecluster -force /* this forces the node on which the command is entered out of the clustered system*/
The
resulting output:
No feedback
An invocation example
satask leavecluster -force /* this forces the node on which the command is entered out of the clustered system*/
The
resulting output:
No feedback
An invocation example
satask leavecluster
The resulting output:
CMMVC8034E A compulsory parameter is missing.