Listing the Solaris target and session parameters

This section describes how to list the parameters for the Solaris targets and sessions.

To list the parameters for the Solaris discovered targets and active sessions, perform the following steps:

  1. To see a list of discovered targets and active sessions, issue the following command:
    iscsiadm list target
    You see the following output:
    Target: iqn.1986-03.com.ibm:2145.lodestoneGB1.node1
Alias: -    TPGT: 1
        	ISID: 4000002a0000
        	Connections: 1
  2. Display a list of the target parameters by using one of the following commands.
    • Issue the iscsiadm list target -v command:
      iscsiadm list target -v iqn.1986-03.com.ibm:
2145.lodestoneGB1.node1 <your target name>
      You see the following output:
      Target: iqn.1986-03.com.ibm:2145.lodestoneGB1.node1

Alias: - TPGT: 1
        ISID: 4000002a0000
        Connections: 1
            CID: 0
             IP address (Local): 192.168.1.93:32828
             IP address (Peer): 192.168.1.97:3260
             Discovery Method: SendTargets
             Login Parameters (Negotiated):
                Data Sequence In Order: yes
                Data PDU In Order: yes
                Default Time To Retain: 20
                Default Time To Wait: 2
                Error Recovery Level: 0
                First Burst Length: 32768
                Immediate Data: no
                Initial Ready To Transfer (R2T): yes
                Max Burst Length: 32768
                Max Outstanding R2T: 1
                Max Receive Data Segment Length: 8192
                Max Connections: 1
                Header Digest: NONE
                Data Digest: NONE
    • Issue the iscsiadm list target-param -v command:
      iscsiadm list target-param -v iqn.1986-03.com.ibm:2145.lodestoneGB1.node1
      You see the following output:
      Target: iqn.1986-03.com.ibm:2145.lodestoneGB1.node1
    Alias: -
    Bi-directional Authentication: disabled
    Authentication Type: NONE
    Login Parameters (Default/Configured):
        Data Sequence In Order: yes/-
        Data PDU In Order: yes/-
        Default Time To Retain: 20/-
        Default Time To Wait: 2/-
        Error Recovery Level: 0/-
        First Burst Length: 65536/-
        Immediate Data: yes/-
        Initial Ready To Transfer (R2T): yes/-
        Max Burst Length: 262144/-
        Max Outstanding R2T: 1/-
        Max Receive Data Segment Length: 8192/-
        Max Connections: 1/-
        Header Digest: NONE/-
        Data Digest: NONE/-
    Configured Sessions: 1