mkmdiskgrp

Use the mkmdiskgrp command to create a new storage pool.

Syntax

mkmdiskgrp [ -namepool_name ] [ -mdisk { mdisk_id_list | mdisk_name_list } ] [ -tier { ssd | enterprise | nearline } ] { -extextent_size | -sizemdiskgrp_size -parentmdiskgrp { mdiskgrp_id | mdiskgrp_name } } [ -warning { disk_size | disk_size_percentage% } [ -unit { b | kb | mb | gb | tb | pb } ] ] [ -easytier { auto | on | off | measure } ] [ -ownerowner_type ] [ -encrypt { yes | no } ]

Parameters

-namepool_name
(Optional) Specifies a name to assign to the new pool.
-mdiskmdisk_id_list | mdisk_name_list
(Optional) Specifies a colon-separated list of managed disk IDs or names to add to the storage pool. You can create an empty storage pool by not specifying the -mdiskparameter.
-tierssd | enterprise | nearline
(Optional) Specifies the tier of the MDisk or MDisks being added.
ssd
Specifies an SSD (or flash drive) hard disk drive or an external MDisk for the newly discovered or external volume.
nearline
Specifies an nearline hard disk drive or an external MDisk for the newly discovered or external volume.
enterprise
Specifies an enterprise hard disk drive or an external MDisk for the newly discovered or external volume.

If you do not specify a tier, the current tier value of the MDisk is retained. The default value for an external MDisk is enterprise.

-extextent_size
(Required) Specifies the size of the extents for this group in MB. The ext parameter must have one of the following values: 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, or 8192 (MB).
-sizemdiskgrp_size
(Optional) Specifies the child pool capacity. The value must be a numeric value (and an integer multiple of the extent size).
-parentmdiskgrpmdiskgrp_id | mdiskgrp_name
(Optional) Specifies the parent pool from which the volume extents of the child pool are allocated when creating a child pool. The value must be an mdiskgrp_id or mdiskgrp_name.
-warningdisk_size | disk_size_percentage%
(Optional) Generates a warning when the used disk capacity in the storage pool first exceeds the specified threshold. You can specify a disk_size integer, which defaults to megabytes (MB) unless the -unit parameter is specified; or you can specify a disk_size%, which is a percentage of the storage pool size. To disable warnings, specify 0 or 0%. The default value is 0.
-unitb | kb | mb | gb | tb | pb
(Optional) Specifies the data units for the -warning parameter.
-easytieron | off | auto | measure
(Optional) Specifies if the Easy Tier function is active for this storage pool, or if it is automatically determined. auto is the default value. -easytier is active in storage pools with multiple tiers and is balance with single tiers.
Note:
  • If -easytier is set to auto, the system automatically enables Easy Tier ® functions when the storage pool contains MDisk from more than one tier, and enables automatic rebalancing when the storage pool contains an MDisk from only one tier.
  • If -easytier is set to on, then Easy Tier functions are active.
  • If -easytier is set to off, then Easy Tier functions are inactive.
  • If -easytier is set to measureEasy Tier statistics are collected but Easy Tier management is disabled. (No extents are moved by Easy Tier.)
auto equates to:
  • on if Easy Tier is licensed or no license is required
  • off if Easy Tier is not licensed and a license is required
Specifying -easytier on enables Easy Tier :
  • Management of both single-tier and multi-tier pools
  • Auto rebalance
Extents are moved to balance the I/O load on the MDisks in the pool.
-ownerowner_type
(Optional) Specifies the owner type. The value must be vvol_child_pool.
-encryptyes | no
(Optional) Specifies the encryption status for this storage pool. The values are yes or no.
Remember:
  • If you do not specify -encrypt and encryption is enabled, the system defaults to -encrypt yes (the default encryption setting).
  • When creating a child pool in an encrypted parent pool, the value must not be no. (All other permutations are permitted.)

Description

Table 1. Parameter differences for child pools and storage pools
Parameter Child pool usage Storage pool usage
-name Optional Optional
-mdisk Cannot be used with child pools Optional
-tier Cannot be used with child pools. Optional
-easytier Cannot be used with child pools Optional
-size Mandatory Cannot be used with parent pools
-parentmdiskgrp Mandatory Cannot be used with parent pools
-ext Cannot be used for child pools Mandatory
-unit Optional Optional
-warning Optional Optional
-encrypt Optional Optional for both parent pools and child pools

The mkmdiskgrp command creates a new storage pool and assigns the storage pool name if specified. The ID of the new storage pool is returned if the command is successful. Storage pools are collections of managed disks. Each storage pool is divided into chunks, called extents, which are used to create volumes.

Optionally, you can specify a list of managed disks that will be added to this storage pool. These managed disks cannot belong to another storage pool, and they must have a mode of unmanaged. Use the lsmdiskcandidate command to get a list of suitable candidates. If -tier is specified, it will apply to all of the MDisks.

Each managed disk that is a member of this group is split into extents. The storage that is available on these disks is added to a pool of extents that is available in this group. When a volume is created from this group, free extents from the pool are used, in accordance with the policy used when the volume was first created.

All managed disks subsequently added to this group are split into extents of the same size as the size that is assigned to the group.

When choosing an extent size, take into account the amount of storage you want to virtualize in this group. The system maintains a mapping of extents between volumes and managed disks. The clustered system (system) can only manage a finite number of extents (4 194 304). One system can virtualize the following number of extents:
  • 64 TB if all storage pools have extent sizes of 16 MB.
  • 2 PB if all storage pools have extent sizes of 512 MB.
  • 32 PB if all storage pools have extent sizes of 8192 MB.
Important: The extent size for the storage pool can also limit volume size. Consider the maximum volume size you want to use when creating storage pools. Refer to the information on creating storage pools for a comparison of the maximum volume capacity for each extent size. The maximum is different for thin-provisioned volumes.
Note: When an image mode volume is created, the storage pool increases in capacity by the size of the image mode volume (not the MDisk capacity), because the image mode volume might be smaller than the MDisk itself. If an extent is migrated from the image mode volume or MDisk to elsewhere in the group, the volume becomes a striped volume (no longer image mode). At this point the available capacity might increase, because the extra capacity available on the MDisk (for example, the capacity that was not part of the image mode volume) becomes available.

When specifying -name pool_name if you do not also specify -parentmdiskgrp, you create a parent pool where pool_name is the name of the new storage pool. When specifying -name pool_name, if you also specify -parentmdiskgrp and a size for it, you create a child pool where pool_name is the name of the new storage pool.

An invocation example

This example adds a list of MDisks to the storage pool.

mkmdiskgrp -mdisk mdisk0:mdisk1:mdisk2:mdisk3 -ext 32

The resulting output:

MDisk Group, id [0], successfully created

An invocation example

This example specifies tier and Easy Tier information when adding a list of MDisks to the storage pool.

mkmdiskgrp -mdisk mdisk13:mdisk16 -ext 512 -tier nearline -easytier measure

The resulting output:

MDisk Group, id [13], successfully created

An invocation example

This example creates a child pool from a parent pool.

mkmdiskgrp -size 100 -unit tb -parentmdiskgrp phypool 

The resulting output:

MDisk Group, id [3], successfully created

An invocation example

This example creates a child pool from a parent pool and specifies an owner type.

mkmdiskgrp -parentmdiskgrp p0 -size 100 -unit gb -owner vvol_child_pool

The resulting output:

MDisk Group, id [3], successfully created

An invocation example

This example creates an encrypted child pool from a parent pool.

mkmdiskgrp -parentmdiskgrp 2 -name _my_encrypted_child_pool -encrypt yes -size 10 -unit gb

The resulting output:

MDisk Group, id [5], successfully created