Use the addhostiogrp command to map
I/O groups to an existing host object.
Syntax
addhostiogrp { -iogrpiogrp_list | -iogrpall } { host_name | host_id }
Parameters
- -iogrp iogrp_list
- (Required if you do not use -iogrpall) Specifies
a colon-separated list of one or more I/O groups that must be mapped
to the host. You cannot use this parameter with the -iogrpall parameter.
- -iogrpall
- (Required if you do not use -iogrp) Specifies
that all the I/O groups must be mapped to the specified host. You
cannot use this parameter with the -iogrp parameter.
- host_id | host_name
- (Required) Specifies the host to which the I/O groups must
be mapped, either by ID or by name.
Description
This command allows you to map the list of I/O groups to the specified
host object.
An invocation example
addhostiogrp -iogrpall testhost
The resulting output:
No feedback