You must set the homogeneous queue depth to a calculated value in Fibre
Channel hosts.
Set the queue depth for each volume on the servers by using the following calculation:
- q = ((n * 7000) / (v * p * c))
Where
- q = the queue depth per device path
- n = the number of nodes in the system
- v = the number of volumes configured in the system
- p = the number of paths per volume per host. A
path is a route from a server Fibre Channel port to a system Fibre Channel port or a
server iSCSI port to a system iSCSI port that provides the server access to the volume.
- c = the number of hosts that can concurrently access each volume. Few
applications support concurrent access from multiple hosts to a single volume. This number typically
is 1.
Consider the following example:
- A two-node Lenovo Storage V7000 (n
= 2)
- 1024 volumes (v = 1024)
- One server with access to each volume (c = 1)
- Each host has four paths to each volume (p =
4)
The calculation is rounded up to the next complete digit:
- ((2 * 7000) / (1024 * 4 * 1)) = 4
The queue depth in the operating systems must be set
to four concurrent commands per path.