To remove or replace the lid of a Lenovo Storage V7000 Gen2 node canister, use this procedure.
It might be necessary to service a node canister or to replace a part that is either a customer replaceable unit (CRU) or a field replaceable unit (FRU) that is contained within the canister. To remove the lid of a node canister, follow these steps.
Attention: The lid of a node canister can be removed only after
the canister was removed from its enclosure. Unless you are otherwise
instructed, follow the procedure for removing a node canister to remove
a node canister from its enclosure.
To remove a canister
lid:
- Place the node canister upside down on a work surface, with the release levers facing toward you.
- Open the cover of the canister by depressing the recessed, blue touch points on the lid and sliding the lid away from you, as shown in Figure 1.
To replace a canister lid, slide the canister lid onto
the canister until the catch clicks and the lid edges are flush with
the canister.
Figure 1. Replacing the canister cover
