Explanation
A Fibre Channel adapter that was previously
present has not been detected. For Lenovo Storage V7000, the adapter
is located on the node canister system board.
This node error does not, in itself,
stop the node canister from becoming active in the system; however,
the Fibre Channel network might be being used to communicate between
the node canisters in a clustered system. It is possible that this
node error indicates why the critical node error 550 A
cluster cannot be formed because of a lack of cluster resources is
reported on the node canister.
Data:
- Location—A number indicating the adapter location. Location 0
indicates the adapter integrated into the system board is being reported.
User Response
- If possible, this noncritical node error should be
serviced using the management GUI and
running the recommended actions for the service error code.
- As the adapter is located on the system
board, replace the node canister using the remove and replace procedures.
There
are a number of possibilities.
- If you have deliberately removed the adapter (possibly replacing
it with a different adapter type), you will need to follow the management GUI recommended
actions to mark the hardware change as intentional.
- As the adapter is located on the system
board, replace the node canister using the remove and replace procedures.
Possible Cause—FRUs or other cause: