522: The system board service processor has failed.

Explanation

The service processor (PSOC) in the canister has failed or is not communicating.

Explanation

The service processor (IMM) in the canister has failed or is taking a long time resetting. If the IMM recovers the error will clear itself and, if possible, the canister will become active.

Explanation

The service processor on the system board has failed.

User Response

  1. Reseat the node canister.
  2. If the error persists, use the remove and replace procedures to replace the node canister.

Possible Cause-FRUs or other:

User Response

  1. Wait 30 minutes to see if the canister becomes active.
  2. Reseat the node canister.
  3. If the error persists, use the remove and replace procedures to replace the node canister.

Possible CauseFRUs or other:

User Response

For the 2145-DH8 only:
  1. Shutdown the node.
  2. Remove mains power cable.
  3. Wait for lights to stop blinking.
  4. Plug in power, and then wait for the node to boot.
  5. If that fails, replace the system board.

Exchange the FRU for a new FRU.

Possible Cause-FRUs or other:

2145-CF8, 2145-CG8, or 2145-DH8