Explanation
This error was reported because a large number
of disk error recovery procedures have been performed by the disk
controller. The problem is probably caused by a failure of some other
component on the SAN.
User Response
- View the event log entry and determine the managed disk that was
being accessed when the problem was detected.
- Perform the disk controller problem determination and repair procedures
for the MDisk determined in step 1.
- Perform problem determination and repair procedures for the fibre
channel switches connected to the 2145 and any other Fibre Channel network components.
- If any problems are found and resolved in steps 2 and 3, mark
this error as "fixed".
- If no switch or disk controller failures were found in steps 2
and 3, take an event log dump. Call your hardware support center.
- Go to repair verification MAP.
Possible Cause-FRUs or other:
Other:
- Enclosure/controller fault
- Fibre Channel switch