1360: A SAN transport error occurred.

Explanation

This error has been reported because the 2145 performed error recovery procedures in response to SAN component associated transport errors. The problem is probably caused by a failure of a component of the SAN.

User Response

  1. View the event log entry to determine the node that logged the problem. Determine the 2145 node or controller that the problem was logged against.
  2. Perform Fibre Channel switch problem determination and repair procedures for the switches connected to the 2145 node or controller.
  3. Perform Fibre Channel cabling problem determination and repair procedures for the cables connected to the 2145 node or controller.
  4. If any problems are found and resolved in step 2 and 3, mark this error as "fixed".
  5. If no switch or cable failures were found in steps 2 and 3, take an event log dump. Call your hardware support center.
  6. Go to repair verification MAP.

Possible Cause-FRUs or other:

Other:

Parent topic: Error event IDs and error codes