Explanation
The power supply unit (PSU) is not seated in the
enclosure, or no PSU is installed.
User Response
- If no PSU is installed, install a PSU.
- If a PSU is installed, reseat the PSU in the enclosure.
Attention: To avoid losing state
and data from the node, use the satask startservice command
to put the node into service state so that it no longer processes
I/O. Then you can remove and replace the top power supply unit (PSU
2). This precaution is due to a limitation in the power-supply configuration.
Once the service action is complete, run the satask stopservice command
to let the node rejoin the system.
Possible
Cause-FRUs or other:
- No Part (5%)
- PSU (95%)
Reseat the power supply unit in the enclosure.
Possible
Cause-FRUs or other:
Power supply (100%)