Use this command to create a storage system.
Syntax
sataskmkcluster -clusteripipv4 [ -gwipv4 ] [ -maskipv4 ] [ -namecluster_name ]
sataskmkcluster -clusterip_6ipv6 [ -gw_6ipv6 ] [ -prefix_6int ] [ -namecluster_name ]
Parameters
- -clusteripipv4
- (Optional) The IPv4 address for Ethernet port 1 on the system.
- -gwipv4
- (Optional) The IPv4 gateway for Ethernet port 1 on the system.
- -maskipv4
- (Optional) The IPv4 subnet for Ethernet port 1 on the system.
- -clusterip_6ipv6
- (Optional) The IPv6 address for Ethernet port 1 on the system.
- -gw_6ipv6
- (Optional) The IPv6 gateway for Ethernet port 1 on the system.
- -prefix_6int
- (Optional) The IPv6 prefix for Ethernet port 1 on the system.
- -namecluster_name
- (Optional) The name of the new system.
Description
This command creates a
storage system.
This command calls the satask mkcluster command.