Logical unit (LU) settings are configurable at the LU level.
Pillar Axiom LU options and required settings lists the options that must be set for each LU that is accessed by other hosts. LUs that are accessed by hosts can be configured differently. You can use the AxiomONE Storage Services Manager to change these settings.
| Option | Pillar Axiom Default Setting | Required Setting |
|---|---|---|
| LUN Access | All hosts | Select hosts |
| Protocol | FC | FC |
| LUN Assignment | Auto | Any Attention: Do not change the LUN assignment after the LUNs are
mapped to the
system.
|
| Select Port Mask | All On | All On |
| Quality of Service | Various | No preference. See the note below. |
Note: If you do not know the Quality of Service setting, you can use the following:
|
||