503: Incorrect enclosure type


The node canister has been moved to an expansion enclosure. A node canister will not operate in this environment. This can also be reported when a replacement node canister is installed for the first time.

User Response

Follow troubleshooting procedures to relocate the nodes to the correct location.
  1. Follow the procedure "Getting node canister and system information using a USB flash drive" and review the saved location information of the node canister to determine which control enclosure the node canister belongs in.
  2. Follow the procedure to move the node canister to the correct location, then follow the procedure to move the expansion canister that is probably in that location to the correct location. If there is a node canister that is in active state where this node canister must be, do not replace that node canister with this one.