Explanation
A port that was configured for N_Port ID virtualization (NPIV) is offline.
User Response
Complete the following procedures:
- Check the switch configuration to ensure that NPIV is enabled and that resource limits are
sufficient.
- Run the detectmdisks command and wait 30 seconds after the discovery
completes to see if the event fixes itself.
- If the error is displayed for an NVMe port on a Fibre Channel
adapter, check that the Fibre Channel adapter supports NVMe. If an NVMe port is offline, the Fibre
Channel adapter might not support NVMe.
- If the event does not fix itself, contact IBM Support.