Explanation
A boot drive is either missing, out of sync, or failed.
User Response
Complete the following steps:
- Look at a boot drive view to determine the missing, failed, or out of sync drive. On the
configuration node, run the lsnodebootdrive command. On the node that indicates
an error, run the sainfo lsbootdrive command.
- If a drive is missing, insert a drive.
- If a drive failed, replace the drive.
- If a drive is out of sync, synchronize the drive by running the svctask chnodebootdrive
-sync or the satask chbootdrive -sync commands. These commands cause a
node restart on the specified node.
Possible Cause-FRUs or other: