Explanation
A Fibre Channel or Fibre Channel over Ethernet port is installed but is not included in the Fibre
Channel I/O port mapping, and so the port cannot be used for Fibre Channel I/O. This error is raised
in one of the following situations:
- A node hardware installation
- A change of I/O adapters
- The application of an incorrect Fibre Channel port map
These tasks are normally performed by service representatives.
User Response
Your service representative can use the Service Assistant to modify the Fibre Channel I/O port
mappings to include all of the installed ports that are capable of Fibre Channel I/O. The following
command is used:
satask chvpd -fcportmap