1035: Boot drive problems


Boot drive problems

User Response

Complete the following steps:
  1. Look at a boot drive view to determine the problems.
  2. Run the commands lsnodebootdrive and lsbootdrive to display the status for each slot for users and DMPs to diagnose and repair problems.
  3. If you plan to move any drives, shut down the node if booted yes is displayed for that drive in the boot drive view (lsbootdrive). After you move the drives, a different node error will probably be displayed for you to work on. For 2076 systems, all boot drives are internal, so you must power off the node before any boot drive operations.
  4. If you plan to set the serial number of the system board, see satask chvpd.
  5. If no usable persistent data exists on the boot drives, then contact IBM Remote Technical Support.

Possible Cause-FRUs or other: