To view events, you must access the management GUI.
You must use a supported web
browser. For a list of supported browsers, refer to the "Web browser
requirements to access the management GUI" topic.
You
can use the management GUI to manage your system as soon as you have
created a clustered system.
- Start a supported web browser and point the browser to
the management IP address of your system.
The management IP address is set when
the clustered system is created. Up to four addresses can be configured
for your use. There are two addresses for IPv4 access and two addresses
for IPv6 access.
When the connection is successful, you will see a login
panel.
- Log on by using your user name and password.
- When you have logged on, select Events.
- Ensure that the events log is
filtered using Recommended actions.
- Select the recommended action
and run the fix procedure.
- Continue to work through the alerts
in the order suggested, if possible.
After all the alerts are fixed, check the status of your
system to ensure that it is operating as intended.