Use the chfcmap command to modify attributes
of an existing mapping.
Syntax
chfcmap [ -name new_name_arg ] { fc_map_id | fc_map_name }
chfcmap { [ -consistgrp { consist_group_id | consist_group_name } ] | [ -force ] } [ -copyrate rate ] [ -autodelete { on | off } ] [ -cleanrate { rate } ] { fc_map_id | fc_map_name }
Parameters
- -namenew_name_arg
- (Optional) Specifies the new name to assign to the mapping. The -name parameter
cannot be used with any other optional parameters.
- -force
- (Optional) Specifies that the mapping be modified to a stand-alone
mapping (equivalent to creating the mapping without a consistency
group ID). You cannot specify the -force parameter
with the -consistgrp parameter.
Important: Using the force parameter might result in a loss of access. Use it only under the
direction of your product support information.
- -consistgrpconsist_group_id
| consist_group_name
- (Optional) Specifies the consistency group for which you want to modify the mapping. You cannot
specify the -consistgrp parameter with the -force
parameter.
Note: The consistency group cannot be modified if the specified consistency group
is in the preparing, prepared,
copying, suspended, or
stopping state.
- -copyraterate
- (Optional) Specifies the copy rate. The rate value
can be 0 - 150. The default value is 50. A value of 0
indicates no background copy process. For the supported -copyrate values and
their corresponding rates, see Relationship between the rate, data rate, and grains per second values.
- -autodeleteon | off
- (Optional) Specifies that the autodelete function be turned on
or off for the specified mapping. When you specify the -autodelete
on parameter, you are deleting a mapping after the
background copy completes. If the background copy is already complete,
the mapping is deleted immediately.
- -cleanraterate
- (Optional) Sets the cleaning rate for the mapping. The
rate value can be 0 - 150. The default value is
50.
- fc_map_id | fc_map_name
- (Required) Specifies the ID or name of the mapping to modify.
Enter the ID or name last on the command line.
Description
The chfcmap command
modifies attributes of an existing mapping.
Attention: You
must enter the fc_map_id | fc_map_name last on
the command line.
If you have created several FlashCopy mappings for a group of volumes
that contain elements of data for the same application, you can assign
these mappings to a single FlashCopy consistency
group. You can then issue a single prepare command and a single
start command for the whole group, for example, so that all
of the files for a particular database are copied at the same
time.
The -copyrate parameter specifies
the copy rate. If 0 is specified, background copy
is disabled. The -cleanrate parameter specifies
the rate for cleaning the target volume. The cleaning process is only
active if the mapping is in the copying state
and the background copy has completed, the mapping is in the copying state
and the background copy is disabled, or the mapping is in the stopping state.
You can disable cleaning when the mapping is in the copying state
by setting the -cleanrate parameter to 0.
If the -cleanrate is set to 0,
the cleaning process runs at the default rate of 50 when
the mapping is in the stopping state
to ensure that the stop operation completes.
This table provides the relationship of the copy rate and cleaning
rate values to the attempted number of grains to be split per second. A grain is
the unit of data represented by a single bit.
Table 1. Relationship between the rate,
data rate, and grains per second values
| User-specified rate attribute value |
Data copied/sec |
256 KB grains/sec |
64 KB grains/sec |
| 1 - 10 |
128 KB |
0.5 |
2 |
| 11 - 20 |
256 KB |
1 |
4 |
| 21 - 30 |
512 KB |
2 |
8 |
| 31 - 40 |
1 MB |
4 |
16 |
| 41 - 50 |
2 MB |
8 |
32 |
| 51 - 60 |
4 MB |
16 |
64 |
| 61 - 70 |
8 MB |
32 |
128 |
| 71 - 80 |
16 MB |
64 |
256 |
| 81 - 90 |
32 MB |
128 |
512 |
| 91 - 100 |
64 MB |
256 |
1024 |
| 101 - 110 |
128 MB |
512 |
2048 |
| 111 - 120 |
256 MB |
1024 |
4096 |
| 121 - 130 |
512 MB |
2048 |
8192 |
| 131 - 140 |
1 GB |
4096 |
16384 |
| 141 - 150 |
2 GB |
8192 |
32768 |
Note: Maps that are rc_controlled are
not shown in the view when this command is specified.
An invocation example
chfcmap -name testmap 1
The
resulting output:
No feedback