Use the lsvdisksyncprogress command
to display the progress of volume copy synchronization.
Syntax
lsvdisksyncprogress [ -nohdr ] [ -delim delimiter ] [ -copy id ] [ { vdisk_name | vdisk_id } ]
Parameters
- -copyid
- (Optional) Specifies the volume copy ID to list synchronization progress. You must also
specify a vdisk_name | vdisk_id value. If you do not specify this parameter,
progress is displayed for all copies.
- -nohdr
- (Optional) By default, headings are displayed for each column of data in a concise style view,
and for each item of data in a detailed style view. The -nohdr parameter
suppresses the display of these headings.
Note: If there is no data to be displayed, headings are not
displayed.
- -delim delimiter
- (Optional) By default in a concise view, all columns of data are space-separated. The width of
each column is set to the maximum width of each item of data. In a detailed view, each item of data
has its own row, and if the headers are displayed, the data is separated from the header by a space.
The -delim parameter overrides this behavior. Valid input for the
-delim parameter is a 1-byte character. If you enter -delim
: on the command line, the colon character (:) separates all items of data
in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data
is separated from its header by the specified delimiter.
- vdisk_name | vdisk_id
- (Optional) Specifies the volume name or ID to list synchronization progress.
Description
To display the volume copies that require synchronization, specify the command with no
parameters. To display the synchronization progress for all copies of a volume, specify the command
with the
vdisk_name | vdisk_id parameter. Estimated completion time is displayed
in the
YYMMDDHHMMSS format. The command displays progress for the following special
cases as:
- A synchronized copy displays a progress of 100 and a blank estimated completion time.
- An offline copy or a copy with a zero synchronization rate displays a blank estimated completion
time. An offline copy displays (gradually) decreasing progress if the volume is being written
to.
- Nonmirrored volumes are displayed as a single copy with a progress of 100, and a blank estimated
completion time.
The lsvdisksyncprogress command also displays the progress of a mirrored
volume synchronization. After you create a mirrored volume by using the
mkvdisk or addvdiskcopy command, you can use the command to
monitor the progress of the synchronization.
An invocation example
lsvdisksyncprogress
The resulting output
vdisk_id vdisk_name copy_id progress estimated_completion_time
0 vdisk0 1 50 070301150000
3 vdisk3 0 72 070301132225
4 vdisk4 0 22 070301160000
8 vdisk8 1 33
An invocation example
lsvdisksyncprogress vdisk0
The resulting output
vdisk_id vdisk_name copy_id progress estimated_completion_time
0 vdisk0 0 100
0 vdisk0 1 50 070301150000
0 vdisk0 0 100