25 Gbps Ethernet host interface adapter ports and indicators

You can install an optional 2-port 25 Gbps Ethernet host interface adapter in the system.

The system can support a 25 Gbps card that uses either the RDMA over Converged Ethernet (RoCE) networking protocol or the iWARP (Internet Wide-area RDMA Protocol) networking protocol. Each optional host interface adapter is used for Internet Small Computer System Interface (iSCSI) connections to host systems. The ports cannot be used for system management. Small Form-factor Pluggable (SFP) transceivers are installed on the adapter. The transceivers support Fibre Channel cable connections to an Ethernet network.

Because each Lenovo Storage V3700 V2 or Lenovo Storage V3700 V2 XP system has two onboard Ethernet ports, the ports on the Ethernet card are numbered 3 and 4 (starting from left to right). Because each Lenovo Storage V5030 and Lenovo Storage V5030F system has three onboard Ethernet ports, the ports on the Ethernet card are numbered 4 and 5 (starting from left to right).

25 Gbps Ethernet host interface adapter (RoCE)

As 25 Gbps Ethernet host interface adapter ports and LEDs (RoCE) shows, the optional host interface adapter has two 25 Gbps Ethernet ports.

Figure 1. 25 Gbps Ethernet host interface adapter ports and LEDs (RoCE)
25 Gbps Ethernet ports and LEDs (RoCE)

Each port on the 2-port 25 Gbps Ethernet adapter has one bi-color LED that indicates the status of the link. LED indicators for 25 Gbps Ethernet host interface adapter (RoCE) summarizes the possible values of the LEDs.

Table 1. LED indicators for 25 Gbps Ethernet host interface adapter (RoCE)
Color	State	Meaning
None	Off	The port is not active.
Green	Solid	The port has a valid link with no active traffic.
Green	Blinking	The port has a valid link with active traffic.
Yellow	Blinking	Indicates a problem with the link.

25 Gbps Ethernet host interface adapter (iWARP)

25 Gbps Ethernet host interface adapter ports and LEDs (iWARP) shows the 25 Gbps Ethernet host interface adapter (iWARP). Each port has a single LED that indicates the status of the port and link.

Figure 2. 25 Gbps Ethernet host interface adapter ports and LEDs (iWARP)
25 Gbps Ethernet ports and LEDs (iWARP)

LED indicators for 25 Gbps Ethernet host interface adapter (iWARP) summarizes the possible values of the LEDs on the host interface adapter (iWARP).

Table 2. LED indicators for 25 Gbps Ethernet host interface adapter (iWARP)
Color	State	Meaning
Off	Off	The ports and links are not active.
Green	Solid	The ports have a valid link.