Explanation
A
Fibre Channel I/O port might be established on either a FC platform
port or an Ethernet platform port using Fiber Channel over Ethernet
(FCoE).
Data:
Three numeric values are listed:
- The ID of the first FC I/O port that does not have connectivity.
This is a decimal number.
- The ports that are expected to have connections.
This is a hexadecimal number, and each bit position represents a port
- with the least significant bit representing port 1. The bit is 1 if the port is expected
to have a connection to all online node canisters.
- The ports that actually have connections. This is
a hexadecimal number, each bit position represents a port, with the
least significant bit representing port 1. The bit is 1 if the port
has a connection to all online nodes.
User Response
- If possible, this noncritical node error should be serviced
using the management GUI and
running the recommended actions for the service error code.
- Follow the procedure: Mapping I/O ports to platform ports to determine
which platform port does not have connectivity.
- There are a number of possibilities.
- If the port’s connectivity has been intentionally reconfigured,
use the management GUI recommended
action for the service error code and acknowledge the intended change.
- Resolve other node errors relating to this platform port or I/O
port.
- Check that the SAN zoning is correct.
Possible Cause: FRUs or other cause: