Explanation
The service processor (PSOC) in the canister has
failed or is not communicating.
Explanation
The service processor (IMM) in the canister has failed or is taking
a long time resetting. If the IMM recovers the error will clear itself and, if possible, the
canister will become active.
Explanation
The service processor on the system board failed.
Explanation
An issue was found with one of the adapters, such as the Fibre Channel adapter or the iSCSI
adapter.
User Response
- Reseat the node canister.
- If the error persists, use the remove and replace procedures to replace the node canister.
Possible Cause-FRUs or other:
User Response
- Wait 30 minutes to see if the canister becomes active.
- Reseat the node canister.
- If the error persists, use the remove and replace procedures to replace the node canister.
Possible Cause—FRUs or other:
User Response
For the 2145-DH8 only:
- Shutdown the node.
- Remove mains power cable.
- Wait for lights to stop blinking.
- Plug in power, and then wait for the node to boot.
- If that fails, replace the system board.
Exchange the FRU for a new FRU.
Possible Cause-FRUs or other:
2145-DH8
- System board assembly (100%)
User Response
Contact your hardware manufacturer.