Explanation
The node canister has been moved to an expansion
enclosure. A node canister will not operate in this environment. This can also be reported when a replacement node canister
is installed for the first time.
User Response
Follow troubleshooting procedures to relocate the nodes to
the correct location.- Follow the procedure Getting node canister and system information using a USB flash
drive and review the saved location information of the node canister to determine which control
enclosure the node canister belongs in.
- Follow the procedure to move the node canister to the correct location, then follow
the procedure to move the expansion canister that is probably in that location to the correct
location. If there is a node canister that is in active state where this node canister must be, do
not replace that node canister with this one.