Installing a second expansion canister

If you have purchased a second expansion canister for your expansion enclosure, you must install it.

The unused canister bay is occupied by a filler canister. You must remove it before you can install the second canister.

To install the canister, complete the following steps.

  1. Remove the filler canister as shown in Removing the filler canister.
    1. Unlatch the release levers and pull them open.
      The canister moves out of the slot approximately 0.6cm (0.25 inch).
    2. Slide the canister out of the enclosure.
    Figure 1. Removing the filler canisterImage of expansion enclosure rear, showing removal of filler canister
  2. Install the second expansion canister as shown in Installing the second expansion canister.
    1. Slide the canister into the enclosure.
    2. Close and latch the release levers.
    Figure 2. Installing the second expansion canisterImage of expansion enclosure rear, showing insertion of expansion canister
Related concepts
Installing options in the expansion enclosure