SAS cabling guidelines

When connecting SAS cables between 2U expansion enclosures, you must follow a list of guidelines to ensure that your configuration is valid.

Orienting the connector

When inserting SAS cables, make sure the connector (SAS cable connectors) is oriented correctly.

The orientation of the connector must match the orientation of the port before you push the connector into the port. The cable connector and socket are keyed, and it is important that you have proper alignment of the keys when the cable is inserted.
The blue pull tab must be below the connector.
Insert the connector gently until it clicks into place. If you feel resistance, the connector is probably oriented the wrong way. Do not force it.
When inserted correctly, the connector can only be removed by pulling the tab.
When both ends of a SAS cable are inserted correctly, the green link LEDs next to the connected SAS ports are lit.

Figure 1. SAS cable connectors

Be aware of the following guidelines when you attach the cables to the SAS ports in 2U expansion enclosures.

No more than 10 expansion enclosures can be chained to SAS port 1 of a node canister. The expansion enclosures in this chain should be installed below the control enclosure.
For Lenovo Storage V5030 and Lenovo Storage V5030F systems only, no more than 10 expansion enclosures can be chained to SAS port 2 of a node canister. The expansion enclosures in this chain should be installed above the control enclosure.
No cable can be connected between a port on a left canister and a port on a right canister.
A cable must not be connected between ports in the same enclosure.
A connected port on the node canister must connect to a single port on an expansion canister. Cables that split the connector out into separate physical connections are not supported.
Attach cables serially between enclosures; do not skip an enclosure.
The last enclosure in a chain must not have cables in port 2 of canister 1 and port 2 of canister 2.
Ensure that cables are installed in an orderly way to reduce the risk of cable damage when replaceable units are removed or inserted.

Refer to Connecting SAS cables to the expansion enclosures for examples of SAS cable connections on each system.