You must be aware of the requirements for attaching the
system to HP 9000 and HP Integrity servers.
You must meet the following requirements before you can
attach the system to your host:
- Check the LUN limitations for your host. Ensure that enough Fibre Channel adapters are installed in the server to manage
the total LUNs that you want to attach.
Note: If you want to use more
than eight LUNs per SCSI target, you must set the type attribute to hpux when you create the host object. You can use the
system command-line interface or the management GUI to set this attribute.
- The system supports HP-UX version 11.31 September 2007 (and
later 0803) releases. Hosts that attach to the system and that have
0709 patches must also have the following patches applied:
- PHKL_37453 (esdisk)
- PHKL_37454 (esctl)
- PHCO_37483 (scsimgr)
The 0803 bundle contains these patches. Note: An RPQ is required
if you are using a version earlier than the HP-UX 11.31 September
2007 release.
- Ensure that you have the documentation for your HP system and
the installation information for your IBM hardware.
- Ensure that you installed the correct operating systems and version
levels on your host.
The following website provides all system publications:
https://datacentersupport.lenovo.com/