Switch zoning configurations for the IBMFlashSystem system include fabric zoning, target port sharing, host splitting, and controller splitting.
The IBMFlashSystem system has no zoning limitations.
By default, IBMFlashSystem systems present themselves a as single controllers with a WWPN for each port that is zoned to the system. For example, if one of these storage systems has four ports that are zoned to the system, the IBMFlashSystem is shown as a system with four WWPNs. A given logical unit (LU) must use the same logical unit number (LUN) to be mapped through all controller ports that are zoned to the system.
The controller must be separately zoned tothe system ports for exclusivity requirements.
For robustness, each fabric zone to all the backend ports on the system must contain a IBMFlashSystemstorage system port from each controller.
The IBMFlashSystemstorage system can support LUN masking to enable multiple servers to access separate LUNs through a common controller port. Explicit zoning is safest. Otherwise, ensure separate exclusive zoning if you are using the default.
Host splitting can be used. For hosts that connect tothe system and the controller, the system must have sole access to its LUNs. Explicit host connections for LUNs tothe system are expected to be used in this configuration.
Controller splitting is supported.The system does not need exclusive access to the controller. Explicit mapping is required for LUNs to give exclusive use by the system. Becausethe system cannot detect any other use of the controller, performance might be affected.