There are limitations in switch zoning for the system and EMC VMAX systems.
The system switch zone must include at least one target port on two or more Fibre Channel adapters to avoid a single point of failure.
The EMC VMAX must be configured to present logical units (LUs) to all system initiator ports that are in the fabric zone.
Only system initiator ports that are LUN-masked on the EMC VMAX controller should be present in the fabric zone.
You can connect a maximum of 16 EMC VMAX ports to the system. There are no further special zoning requirements. Configurations that are set up to adhere to the requirements that are described in previous system releases are also supported, but should not be followed for new installations.