Configuring site information for the system

To configure a HyperSwap system topology on Lenovo Storage V5030 or Lenovo Storage V5030F systems, you must assign enclosures, external storage systems, and hosts to a specific site.

Using the management GUI

You can use the Modify System Topology wizard in the management GUI to easily configure the site names and assign objects on your system to a site. The Modify Topology wizard automatically detects any Fibre-Channel-attached storage, but iSCSI storage must be added manually before the site assignments can be configured. You can use either the management GUI or the command-line interface to add Storwize systems. Dell EqualLogfic systems can be configured with the command-line interface only. Complete the following steps to configure the topology for the system and to optionally add iSCSI-attached storage:

In the management GUI, select Monitoring > System. In the Actions menu, select Modify System Topology.
Follow the wizard to complete the configuration of the HyperSwap topology.
If you are using iSCSI-attached external storage, you must add the storage to the system and specify the site by using the Add iSCSI External Storage wizard. To access the wizard, select Pools > External Storage > Add iSCSI External Storage.
Select IBM Storwize as the external storage system that you are adding. The system supports iSCSI connections to Storwize family products and to Dell Equallogic systems, but you must configure Dell EqualLogic systems with the command-line interface.
Enter the information for the source and target ports for the iSCSI connection and specify the site for the iSCSI-attached storage.

Using the CLI

You can also use the command-line interface to configure site information and configure the system as a HyperSwap topology. Separate commands are used for each configuring site definitions for the necessary objects on the system. Although you do not need to name sites, creating names that are based on the location or use of the site simplifies management of the HyperSwap topology. Complete the following steps to configure site information and set the system as a HyperSwap topology:

For easier management of the HyperSwap topology, create specific names for each site on the system. If names are not specified, sites can be referred to by their default name or numeric ID. Enter the following command to create specific names for each site.
```
chsite -name losangeles 1
```
In this example, site 1 is now named losangeles. To rename the other sites in the HyperSwap topology, enter the same command with names for the other sites:
```
chsite -name sandiego 2
chsite -name quorum 3
```
In this example, site 2 is now named sandiego and site 3 is named quorum.
Note: IP quorum applications can be used at a third site to provide a tie-break if connectivity is lost between site 1 and site 2. For more information, see the IP quorum configuration information.
Enter the following commands to assign existing node canisters in each control enclosure (I/O group) to sites:
```
chnodecanister -site losangeles canister1
```
```
chnodecanister -site losangeles canister2
```
Both node canisters in a control enclosure must be assigned to the same site. In this example, the I/O group that contains canister1 and canister2 are assigned to the site losangeles. To assign the node canisters in another I/O group to the other site, enter the following commands:
```
chnodecanister -site sandiego canister3
```
```
chnodecanister -site sandiego canister4
```
In this example, the I/O group that contains canister3 and canister4 are assigned to the site sandiego. You must assign a site for all node canisters in the system.
Enter the following command to assign existing external storage systems to sites:
```
chcontroller –site losangeles storagesystem1
```
In this example, storagesystem1 is assigned to site losangeles. To assign a storage system to the other site, enter the following command:
```
chcontroller –site sandiego storagesystem2
```
In this example, storagesystem2 is assigned to site sandiego.
If you plan to use an external storage system to provide quorum, then you must assign that to the third site. Alternatively, an IP quorum application can be used to provide quorum. For more information, see the IP quorum configuration information. To assign an external storage system to the third site, enter the following command:
```
chcontroller –site quorum storagesystem3
```
In this example, storagesystem3 is assigned to site quorum.
You must assign a site for all storage systems that are present in the configuration.
Enter the following command to assign existing hosts to sites:
```
chhost -site losangeles host1
```
In this example, host1 is assigned to site losangeles. If you have other hosts, you can assign them to other sites:
```
chhost -site sandiego host2
```
In this example, host2 is assigned to site sandiego.
After all the site assignments are complete for enclosures, storage systems, and hosts, set the system topology to HyperSwap by entering the following command:
```
chsystem -topology hyperswap
```
Optionally, configure bandwidth settings for the background copy operations between each site by entering the following command:
```
chpartnership -linkbandwidthmbits 2048 -backgroundcopyrate 50 mysystem
```
Background copy is the term that is used for the initial synchronization and any subsequent resynchronization traffic for HyperSwap volumes in the system.

After you complete these steps, you can configure HyperSwap volumes to create copies at each site.

Configuring an external iSCSI controller by using the CLI

After you change the system topology to hyperswap and nodes are assigned sites, you can configure an external iSCSI controller by completing the following steps.

From the nodes of site 1, discover the iSCSI target controller:

detectiscsistorageportcandidate –srcportid 1
 -targetip IP1 -site 1

Check the status of the discovered targets:

lsiscsistorageportcandidate id src_port_id target_ipv4 | target_ipv6
 target_iscsiname iogroup_list configured status
 site_id site_name 0 1 IP1 IQN1 1:1:1:1 no Full 1 site1

From the nodes of site 1, add a session to the discovered targets:
```
addiscsitorageport -site 1 0
```

From the nodes of site 1, view the established sessions with the target:

id src_port_id target_ipv4 | target_ipv6 target_iscsiname
 controller_id iogroup_list status site_id site_name
 0 3 IP1 IQN1 5 1:1:1:1 full 1 site1

The new controller can be shown as available by entering the lscontroller command. Assign a site:
```
chcontroller -site 1 controllerID
```
From the system nodes of site 2, repeat steps #svc_config_hyperswap_sites/discoveriscsitarget through #svc_config_hyperswap_sites/shownewcontroller for discovering and establishing sessions to the same iSCSI controller or a different iSCSI controller.