The system supports multiple LUNs on an IBM Power Systems AIX host.
The system supports multiple path configurations for a LUN. You
can have multiple hdisks (logical hard disks) available on the host
for each physical LUN.
To configure multiple paths for all LUNs,
run the
cfgmgr command to scan for new devices.
- If you are using the AIX Path Control Module (AIXPCM) and
want to check that the multipath device is available, run the lsdev command and search for the hdisk# line with the MPIO IBM #### FC Disk label against
it.
- If you are using the Subsystem Device Driver Path Control Module
(SDDPCM), you might also find that the Subsystem Device Driver (SDD)addpaths and datapath query device commands are helpful when you configure multiple paths.
For more information about which multipath driver to use,
see http://www.ibm.com/support/docview.wss?uid=ssg1S1010218.