The ID of the first unexpected inactive port. This ID is a decimal
number.
The ports that are expected to be active, which is a hexadecimal
number. Each bit position represents a port, with the least significant
bit representing port 1. The bit is 1 if the port is expected to be
active.
The ports that are actually active, which is a hexadecimal number.
Each bit position represents a port, with the least significant bit
representing port 1. The bit is 1 if the port is active.
User Response
If possible, use the management GUI to
run the recommended actions for the associated service error code.
Possibilities:
If the port has been intentionally disconnected, use the management GUI recommended
action for the service error code and acknowledge the intended change.
Check that the SAS cable is connected at both ends and is not
damaged. If necessary, replace the cable.
Check the switch port or other device that the cable is connected
to is powered and enabled in a compatible mode. Rectify any issue.
The device service interface might indicate the issue.
Use the remove and replace procedures to replace the adapter.