Explanation
The cluster has detected that an IBM DS series
disk controller's configuration is not supported by the cluster. The
disk controller is operating in RDAC mode. The disk controller might
appear to be operating with the cluster; however, the configuration
is unsupported because it is known to not work with the cluster.
User Response
- Using the IBM DS series console, ensure that the host type is
set to 'IBM TS SAN VCE' and that the AVT option is enabled. (The AVT
and RDAC options are mutually exclusive).
- Mark the error that you have just repaired as "fixed". If
the problem has not been fixed it will be logged again; this could
take a few minutes.
- Go to repair verification MAP.
Possible Cause-FRUs or other:
Other:
- Enclosure/controller fault