When you add an expansion
enclosure to an existing system, you must use the management GUI to update the system configuration.
The
management GUI requires a supported web browser (see
Checking your web browser settings for the management GUI).
To add an expansion enclosure to your system,
complete the following steps.
- Install support rails for the new enclosure.
- Install the new enclosure in the rack.
- Connect the expansion enclosure attachment cables.
- Connect the power cables and wait for the SAS light-emitting
diodes (LEDs) to illuminate.
- Start the management GUI.
- Go to .
- On the System page,
select .
- Continue to follow the on-screen
instructions.