Add a control enclosure
to an existing system.
To complete this step, you must use a supported web browser.
Verify that you are using a supported web browser from the following
Web site:
https://datacentersupport.lenovo.com/us/en/products/storage/lenovo-storage/v3700v2/6535
To add another control enclosure into an existing system,
complete the following steps:
- Configure the Fibre Channel switch to allow for correct
zoning between the control enclosures.
The correct zoning provides a way for the Fibre Channel ports
to connect to each other.
If the configuration tool for the Fibre Channel switch does
not provide details of the worldwide port names (WWPNs), use the service
assistant to find them or use the USB flash drive to find the status of the node. See the "Troubleshooting" topic that is available from the Lenovo Storage V series Information
Center.
- Start the management GUI.
- Go to .
- On the System page, select .
- Continue to follow the on-screen instructions.
This step completes
the quick installation procedures. If you are setting up for the first
time, see the configuring topics and continue to follow the tasks
available in Getting Started from the management GUI. If you added another control enclosure into an existing system,
continue to do your standard tasks.