The host bus adapters (HBAs) for an
IBM Z® host system must be ordered as features. These features
are either factory-installed when you order a new system or installed
into an existing system by a service representative.
To check the installation of the HBA and to configure the
HBA to work with the system, complete the following steps:
- Ensure that the appropriate features (FICON, FICON
Express, FICON Express2, or FICON Express4) are installed on your
IBM Z® host system.
- Configure the HBA to run in FCP mode.
See the following
Web site for additional information about FCP connectivity:
www.ibm.com/systems/z/hardware/connectivity/