Configuring settings for the EMC Symmetrix and Symmetrix DMX
A number of settings and options are available through the EMC Symmetrix configuration interface.
Settings and options are available in the following categories:
System
Port
Logical unit (LU)
Initiator
Global settings for the EMC Symmetrix and Symmetrix DMX
Global settings apply across the EMC Symmetrix and Symmetrix DMX systems.
Port settings for the EMC Symmetrix and Symmetrix DMX
Target port characteristics can be set by using the
set port
command from the Symmetrix Command Line Interface (SYMCLI).
Logical unit settings for the EMC Symmetrix and Symmetrix DMX
Logical unit (LU) settings are configurable at the LU level.
Initiator settings for the EMC Symmetrix and Symmetrix DMX
Initiator settings for SPC-2 should be set to disabled for EMC Symmetrix and Symmetrix DMX.
Mapping and virtualization settings for the EMC Symmetrix and Symmetrix DMX
You can map logical units (LUs) to a host on EMC Symmetrix and Symmetrix DMX systems.
Volume Logix and masking
Use Volume Logix to restrict access to particular WWPNs on the fabric for Symmetrix Volumes.
Parent topic:
Configuring EMC Symmetrix and Symmetrix DMX systems
Related concepts
External storage systems
Related tasks
Configuring a balanced storage system
Related information
Servicing storage systems