You can share the HDS Thunder, Hitachi AMS 200, AMS 500, and AMS 1000, WMS100, and HDS TagmaStore Workgroup Modular Storage (WMS) systems
between a host and the system,
with certain restrictions.
The following restrictions apply:
- The same host cannot be connected to both the system and an HDS Thunder, Hitachi AMS 200, AMS 500, and AMS 1000, WMS100, or HDS TagmaStore WMS at the same time because Hitachi Dynamic
Link Manager (HDLM) and the subsystem device
driver (SDD) cannot coexist.
- For the HDS Thunder 9200, a target port cannot be shared between
a host and the system. If a target port is used by the system, it cannot be present in a switch zone that allows
a host to access the port.
- Logical units (LUs) cannot be shared between a host and the system. The Thunder 9200 must be set into M-TID M-LUN
mode and Mapping Mode must be enabled on Thunder 95xx. No LU
can have a LUN number that is associated with a port that is zoned
for host use while also having a LUN number that is associated with
a port that is zoned for the system.